7 Best Jack for Travel Trailer for Easy Towing

For most buyers, POLESTAR Electric Trailer Jack is the top pick. It earns that spot as the best jack for travel trailer owners because its powered lift cuts out much of the manual cranking. It is a practical choice for owners who want simpler hitching at campsites or storage lots.

The right trailer jack depends on your trailer’s tongue weight, available mounting space, lift range, and power source. Larger trailers need suitable capacity, while compact models may fit better on shorter A-frames. This guide is for shoppers replacing a worn jack or adding an electric one to a travel trailer. The seven picks below are ranked with clear reasons and honest drawbacks for each, so you can compare convenience, fit, and lifting needs before buying.

Quick Comparison

7 Top Trailer Jack Picks

This ranked list counts down from capable options to the top travel trailer jack for different towing needs.

7. SHALL RV Stabilizer Jacks, 4-Pack

Best for: Travel trailer owners needing stable support

The SHALL RV Stabilizer Jacks are a four-piece set for reducing trailer movement at camp. Each die-cast aluminum stand adjusts from 11 to 17 inches with a screw mechanism and T-handle. The manufacturer rates each jack for up to 7,500 pounds, but these stands are for stabilization only, not lifting or raising an RV. Position and level the trailer first, then use the jacks for added support.

Each stand weighs 1.87 pounds, making the set easy to carry and store. The jacks nest together, and the kit includes eight rubber pads and eight support nuts. Four of each are spares. These parts cushion the contact points and may reduce noise against the RV frame. A wood or concrete block under each jack is recommended, adding setup steps and storage needs. At around $40, this is a budget-friendly option for pop-up campers, travel trailers, and some fifth-wheel setups. Check frame clearance before buying.

Pros

• The 11- to 17-inch adjustment range helps accommodate uneven campsites.
• Four jacks provide support at multiple points under the trailer.
• Lightweight aluminum construction keeps each stand at 1.87 pounds.

Cons

• These jacks cannot lift or level an RV, so separate leveling equipment may be necessary.
• Wooden or concrete blocks are recommended underneath, which adds bulk and preparation time.

Check Price on Amazon →

6. BougeRV Electric Tongue Jack Cover

Best for: RV owners protecting exposed tongue jacks

The BougeRV RV Electric Tongue Jack Cover is a fitted weather cover for most trailer power jacks. It measures 14 inches high, 5 inches wide, and 10 inches deep, so measuring your jack first is still necessary. The cover uses 600D polyester Oxford fabric, which should handle outdoor use better than thin plastic covers. At around $9, it is an inexpensive way to shield the jack casing, switches, and light from rain, dirt, and sun.

Its strongest detail is the two-sided adjustment system. Each side has a drawstring and barrel cord lock, helping hold the cover around the jack instead of relying on a loose fit. Internal seams include sewn-in PU weather strips for added water resistance. The material is also designed to resist fading and avoid transferring color onto a white jack head. Still, “universal” mainly means broad compatibility, not a guaranteed fit for every model. A jack with unusual controls or a larger head may need a different cover.

Pros

• 600D waterproof Oxford fabric provides stronger outdoor protection than lightweight fabric.
• Two drawstrings and barrel locks help secure the cover in windy conditions.
• PU-treated internal seams add protection against rain entering through stitching.

Cons

• The 14-by-5-by-10-inch size may not fit oversized or unusually shaped jacks.
• It protects the jack while covered, but the jack must still be uncovered for use.

Check Price on Amazon →

5. Kohree RV Scissor Jacks

Best for: Small RVs and travel trailers

These Kohree scissor jacks are a two-piece support set for leveling and stabilizing an RV, camper, pop-up, or trailer. Each jack uses heavy-duty steel with an electrophoresis surface treatment, which helps resist wear and corrosion during regular outdoor use. The pair has a listed 7,500-pound capacity, but buyers should match that rating with their vehicle and use instructions.

The jacks extend to 24 inches and retract to 4 inches, giving them room for uneven campsites while remaining fairly compact underneath a trailer. Each one measures 26 inches long when retracted and 7.3 inches wide. A wide bow-tie base spreads contact over the ground. The included crank handle allows manual adjustment, while the supplied drill bit can speed setup with a compatible power drill, which is not included. Around $70 for two, this set suits owners who need replacement stabilizers or extra support. It is not a complete mounting kit, so check the hardware and fit before ordering.

Pros

• Two 24-inch scissor jacks provide support at separate points.
• Steel construction and electrophoresis treatment add outdoor durability.
• Crank handle and included drill bit offer manual or powered adjustment.

Cons

• A power drill and likely mounting hardware must be supplied separately.
• These are stabilizers, not a substitute for the RV’s main lifting jacks.

Check Price on Amazon →

4. OULEME 6500 lb RV Camper Scissor Jack

Best for: Weekend RV owners leveling trailers

The OULEME 6500 lbs Scissor Jack is a two-pack for stabilizing and leveling RVs, campers, and trailers. Each jack adjusts from 4 to 24 inches, giving it useful range for many trailer frames. The listed retracted size is 26 inches long, 5 inches wide, and 4 inches high. An extra-wide base plate helps spread the load on firm ground. The 6,500-pound lifting rating provides substantial capacity, but buyers should still follow the manual and use suitable safety supports.

The kit includes a manual crank handle, a 3/4-inch drill socket, eight 3/8-inch mounting screws, and instructions. The drill socket can speed setup for users with a compatible drill, while the hand crank gives a backup option. Chromate-plated bolts use a salt-spray-tested coating to help resist corrosion during outdoor storage and travel. Around $69, this pair offers a practical setup for owners who need replacement stabilizers, though trailer fit remains the key concern.

Pros

• 4-to-24-inch adjustment suits many trailer heights.
• Extra-wide base plates improve stability on firm surfaces.
• Includes a crank, drill socket, eight screws, and instructions.

Cons

• Manual operation takes more time than powered stabilizers.
• A two-jack set may not cover every corner of a larger RV.

Check Price on Amazon →

3. Kohree Electric Trailer Jack

Best for: RV owners leveling heavy travel trailers

The Kohree 7500lbs Electric Trailer Jack is a powered tongue jack for RVs, campers, and travel trailers. Its rated lifting capacity reaches 7,500 pounds, while the 22-inch lift range accommodates different hitch heights and uneven campsites. Push-button controls handle raising and lowering, so hitch setup takes less effort than using a standard hand-crank jack. At around $180, it sits in the midrange for an electric trailer jack.

Its built-in top level gives you a quick reference when adjusting the trailer. A bright LED light illuminates the hitch area during early or late setups. The dual-wire direct connection can simplify installation, but it requires access to the trailer’s electrical system. A manual crank handle provides backup operation if the motor or battery cannot run. The weather-resistant cover helps shield the jack from rain and dust, while overload protection adds a useful safety measure. Kohree includes one year of manufacturer service.

Pros

• 7,500-pound capacity supports high-load hitch and leveling work.
• The 22-inch lift range and built-in level aid precise positioning.
• LED lighting and the manual crank help during dark setups or power loss.

Cons

• Direct-wire installation may require basic electrical work or professional help.
• Weather-resistant protection does not make the jack fully waterproof, so exposed mounting still needs care.

Check Price on Amazon →

2. VEVOR A-Frame Trailer Jack

Best for: Utility trailer owners needing extra lift

The VEVOR 5000-pound A-frame trailer jack is designed for horse, utility, travel, and yacht trailers. Its height adjusts from 9.65 to 24.64 inches, covering both lower and taller trailer tongues. A three-position drop leg adds more setup flexibility when leveling the trailer. The swivel design also lets the jack fold up parallel to the tongue for travel.

Heavy-duty carbon steel gives the frame strength, while galvanized inner and outer tubes resist rust. A powder-coated finish adds another layer of protection for outdoor storage and towing. The jack can be bolted or welded to the trailer tongue, so installation depends on your trailer and preferred setup. A detachable handle allows manual operation if the powered mechanism is unavailable, though the listing does not provide motor, battery, or operating-speed details. At around $41, it offers a low-cost way to replace or add a tongue jack, but buyers should confirm the mounting dimensions before ordering.

Pros

• Supports up to 5,000 pounds for many horse, utility, and travel trailers.
• Provides a broad 9.65-to-24.64-inch height range with a three-level drop leg.
• Galvanized tubes and powder-coated carbon steel help resist outdoor corrosion.

Cons

• The 5,000-pound rating does not confirm that every trailer frame or tongue can safely support that load.
• Installation may require drilling, welding, or other trailer modifications, depending on the existing mounting setup.

Check Price on Amazon →

1. POLESTAR Electric Trailer Jack

Best for: Heavy A-frame trailers and RVs

The POLESTAR Electric Trailer Jack is an A-frame tongue jack for trailers, RVs, boats, and off-road vehicles. It supports a dynamic load up to 5,000 pounds and static lifting power up to 7,500 pounds. At around $181, it costs more than a basic manual jack, but it adds powered operation for frequent hitching and leveling.

Its ball screw mechanism works with a brake motor to provide controlled lifting and lowering. The jack extends from 9 inches to 27 inches, while the 4.5-inch drop leg brings total reach to 31.5 inches. Built-in LED lights illuminate the coupler and hitch area after dark. Weather-resistant construction, a waterproof rain cover, and a resettable circuit breaker add practical protection for outdoor use. The breaker trips when current gets too high, then resets after the issue clears.

Pros

• Handles up to 5,000 pounds dynamically and 7,500 pounds statically.
• Offers up to 31.5 inches of total reach with the drop leg.
• Includes LED work lights, a rain cover, and overload protection.

Cons

• Electric operation depends on a charged trailer battery or available power.
• The $181 price is higher than many manual tongue jacks.

Check Price on Amazon →

Buying Guide

The most important factor is rated lifting capacity, because a trailer jack must support the tongue weight without binding or overheating. Choose a model rated at least 20% above the trailer’s loaded tongue weight, not just its empty weight.

• Lifting capacity: Estimate tongue weight at 10% to 15% of the trailer’s loaded weight, then add a 20% safety margin. A 700-pound tongue needs a jack rated for at least 840 pounds.
• Lift range: Look for 18 to 24 inches of lift, plus a drop leg with several height positions. Confirm the jack reaches your hitch height without fully extending its screw.
• Power source: A 12-volt electric jack suits frequent setup and usually includes a manual crank backup. Check that your trailer battery has at least 20 amp-hours available for repeated lifting.
• Mounting fit: Measure the trailer’s A-frame width and mounting-hole pattern before buying. Many tongue jacks fit 3-inch A-frames, but brackets and bolt spacing vary.
• Weather protection: Choose a steel jack with a sealed motor and a removable vinyl cover for outdoor storage. A manual jack often costs $40 to $100, while electric models commonly range from $120 to $300.

If you must compromise, prioritize capacity and mounting fit over speed, lights, or extra controls.

Frequently Asked Questions

How do I choose a jack for my travel trailer?

Choose a trailer jack by matching its rated lift capacity, mounting style, and travel length to your trailer. A jack rated for 2,000 pounds can suit many small campers, but confirm the actual tongue weight and frame dimensions before buying. Look for enough extension to level the coupler without blocking propane tanks.

What type of jack is best for a travel trailer, an A-frame or a tongue jack?

An A-frame jack is usually the better choice for a trailer with an A-frame coupler, while a side-mount tongue jack suits a straight frame. Many A-frame units use a 2-inch mounting hole, but verify the plate pattern, lift rating, and retracted height before ordering. The wrong mount may require adapter hardware.

Can an electric trailer jack lift and level my camper?

Yes, an electric trailer jack can lift the coupler and handle routine front-to-back leveling, but it should not replace properly rated stabilizers. Many 12-volt models draw power from the trailer’s battery and include a manual override for outages. Check the stated lift rating and carry a spare fuse if you travel far.

Are manual tongue jacks better than powered models?

Manual jacks are often better for occasional travel because they cost less, weigh less, and avoid battery or motor failures. Some hand-crank models list a 2,000- to 5,000-pound rating, but raising a loaded trailer takes more turns and physical effort. They suit owners who park infrequently and want simple equipment.

Conclusion

POLESTAR Electric Trailer Jack is the top pick for travel-trailer owners who want powered tongue lifting and less manual cranking at campsites. If your priority is lower upfront cost, simpler maintenance, or backup use away from shore power, choose a manual tongue jack instead, since it can remain useful when a battery is weak and usually costs less. Before buying, double-check the jack’s size and lift capacity, confirm compatibility with your trailer’s frame, verify whether you need one jack or a pair for your setup, and compare the current price across reputable sellers, because discounts and included hardware can change the final value. A careful match matters more than a long feature list when your trailer is loaded.