How To Make a Camshaft Lamp? Easiest Way to Build

A camshaft is a rotating object or shaft that is found in the engines of cars. It’s a long metal that can move or rotate. It’s hollow inside, making a place for the wires and sockets. The shaft works as a stand for your lamp while hiding all the wires. The structure of a camshaft lamp is easy. Though can you make a camshaft lamp, if you can then how?

How To Make a Camshaft Lamp

There are other reasons too behind people choosing the camshaft lamp to make. Because you can find a camshaft in your old car or buy it at a low price. The other elements needed to make the lamp are cheap too. So when you can experiment and make a lamp at a low price you should go for it.

How To Make A Camshaft Lamp – Step by Step Guidelines

You can make a camshaft lamp in just three steps. The steps are building the base, building the bulb holder, and connecting the two parts electrically. But before that, you need to gather some equipment. You can get them for $15-25. Again you can have the elements in your store then you won’t even need to buy them.

Necessary Items

  • Camshaft
  • Gearbox
  • Lampshade (or bulb shade)
  • Bulb (regular/LED)
  • Wire
  • Switch
  • Insulator
  • Paint
  • Nuts and screws
  • Screwdriver
  • Piler
  • Knife
  • Solder

Building The Base

For the base, you can get a wood piece or any other solid insulator. Make a platform of your desired size and make a hole middle of it. Then set the camshaft in the hole with the help of gears and screws. Let the wires through the hole and camshaft.

Building The Bulb Holder

Get a bulb and set it on the top of the camshaft. You’ll need some support to keep the bulb steady. Use gears to do it, then plug in the bulb with wires. For the shade, you’ll need to add a holder with the gear. Then set the bulb shade on the holder.

Electrical Connection

The structure of the camshaft lamp is simple. On the one end of the wire, there should be the bulb and on the other end, the wires should be plugged into the power source. Though you have to make sure the connections are secured and covered by an insulator. After setting the lamp turn on the power source to see if it works. The lamp should work perfectly if the connections are in the correct order.

Frequently Asked Questions

How Do I Make A Lamp Into A Cam?

To make a lamp into a cam you have to get the electrical cords through the shaft of the cam. At the one end of the shaft, there should be the bulb, and on the opposite side the base. As the shaft of the cam is hollow you can get the cords easily through it.

How To Make A Camshaft?

Camshafts are a part of the engine of cars. They are made of metal in a complex design as their job is complex too. They activate the intakes and exhaust bulbs of an engine. That’s why they rotate or move. They are made of steel nowadays.

What Is The Life Of A Camshaft?

The life of a camshaft is in the beginning and middle of life they work in car engines. As they are made to activate intakes and exhaust bulbs of the engine. But at the end of their lifespan, they aren’t valued and stay in the basement or storerooms or dead cars. But you can use them to make DIY lamps.

How Do I Restore A Camshaft?

You can restore the camshaft of your beloved car by using it in any other car. But if the model of the car doesn’t match you won’t be able to use it. Instead, you can make DIY products with it like, a camshaft lamp.

Conclusion

The making of a camshaft lamp isn’t only fun and exciting but beneficial too. You can reuse the camshaft and gears of your old car. You can make a lamp for your room for cheap and also modify and paint it according to your choice.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *